Given the flexibility and performance of our production resources, we are able to offer a wide range of products that are adapted to a wide variety of applications and uses. Our main wood species include spruce and douglas fir but we also use pine and larch. The dimensions listed in the tables below only provide an indication of our product range. We are also able to provide specific dimensions in line with customer needs. Due to our large storage capacity and an effective logistics organisation, we can guarantee deliveries within the indicated timeframes.

PRODUCT RANGE [down] BUILDING TIMBER AND STRUCTURAL TIMBER (Specific lengths provided on request) 3 to 6 meters 100 125 150 175 200 225 50 x x x x x x 63 x x x x x x 75 x x x x x x

ROOF TRUSS TIMBER 3 to 6 meters 60 72 97 112 122 147 172 197 222 247

FRAMEWORK TIMBER : dried, planed, blunt angles 3 to 6 meters 95 120 145 170 220 45 x x x x x 70     x x x

KVH WOOD (basis for the production of solid building timber) 3 to 6 meters 125 145 165 185 205 63 x x x x x 84 x x x x x

WOOD FOR GLUE-LAMINATED TIMBER AND SOLID PANELS 3 to 6 meters 90 110 130 150 170 190 210 36 x x x x x   x

GARDEN TIMBER 3 to 6 meters 75 95 150 75 x     95   x   19     x

BOARDS FOR CASING – PALLETS - PACKAGING 3 to 6 meters 70 75 80 100 120 145 14 x           15   x         18     x x     22       x     23           x 28       x x

ROOF BATTENS – SLATTING BATTENS 3 to 6 meters 37 14 50 27 x     37   x   33     x

SCAFFOLDING TIMBER 3 to 6 meters 225 38 x 61 x [up]

Recovery and treatment of sawn timber:

• Recutting:all of our sawn timber can be recut to exact lengths from 80 cm to 6 metres.

• Dip coating: immersion surface treatment to protect against blue stain and insects; yellow, green or colourless.

• Impregnation: autoclave high pressure in-depth impregnation. For timber intended for outdoor use or in contact with the sun.

• Drying: we are equipped with 20 induced air drying units with a total capacity of 5,000 m3. This high-performance tool coupled with an extremely consistent heat supply allows us to offer high quality dried timber with a residual moisture rate between 8 and 20%.

• Planing: in order to ensure a production that meets the resistance requirements imposed by the European Union, we have designed a planing and sorting line for our products, combining advanced technology and enabling all of our structural timber production to be classified with the EC mark (standard NBN EN 14 081).

• Profiling: blunt corners, nosing, tongued and grooved, splits, decking timber, etc. Profile design at the customers request.

• ISPM 15 heat treatment

• Classement des bois sciés suivant résistance (marquage CE - norme NBN EN 14 081)

• Conditioning: packaging of dried wood in film to protect against humidity and solar rays.